Ritron DMR Series Callbox DMR Digital

Description

• Wireless, 2-Way, Push-To-Talk, TDMA Tier-2 DMR Digital Technology
• Available in license-required VHF 150-174MHz and UHF, 450-470MHz frequency band
• No Trenching or Construction Costs To Install
• Business Band Frequencies, Long Range Performance – Up to1 Mile** Line-Of-Sight.
• Works with virtually any VHF or UHF DMR Tier-2 Business Band 2-Way Radio
• Durable, Gasket-Sealed, High-Impact Molded, Polycarbonate Enclosure
• Tamper and Vandal-Resistant, Internal Antenna, Long-Life, Machined Aluminum PTT Button
• Battery* Powered For Stand-Alone Operation or external power capable for Always-On Operation. (*For optimal performance of battery only applications, Auto Turn-Off should be Enabled)
• Built-In Relay Control allows Long-Range, Remote Control of Gates or Doors or use with optional strobe light for emergency applications.
• Recordable voice messages. Greeting message and location ID alert message.
• High-Audio Output – Provides easy-to-hear audio in high noise areas,
• Adjustable Volume Settings Via field-programming
• PC programmable
• Standard Flange Mount Hole Pattern Easy Installation. Optional Mounting Brackets Available
• Available In Different Enclosure Colors:  High Visibility Green and Coal Black
• Call Ritron regarding custom colors for volume applications
• Designed and Made in the USA

• RF Channels:1 Channel DMR Digital (12.5KHz)
• Signaling DMR Digital Mode: 16 Color Codes, Subscriber Unit ID (SUID), Destination ID (Individual & Group Selective Call, All-Call)
• Dimensions:  7” H x 5” W x 3” D
• Weight: 2.75 lbs
• Enclosure Material: Gasket Sealed, High-Impact Polycarbonate
• Colors: Black or High-Viz Green
• Environmental: Splash resistant, shock and vibration per Ritron test
• Operating Temperature: -20°C to +55°C (-4°F to 131°F) Battery rating. At 0°C the capacity is < 50% rated) Talk range will decrease at low temperatures when operating on alkaline batteries.
• Programming: Field programming capability of limited parameters. Full programming capability using internal USB Connector used for full PC Programming.
• Built-in Remote Control Relay: Can be used to remotely control gates, doors or strobe light. (7 Series) Relay switch is controlled when callbox receives the pre-programmed selective signaling command code.
  • SPDT, 3A, 125VAC/30VDC – Normally Open or Normally Closed (NO Default). Modes of Operation: Momentary or Toggle, On/Off.
  • Aux Sensor Monitoring Input : Optional sensors used to detect motion, gate movement, vandal/tamper or vehicle presence can be connected to the callbox using the sensor input.
  • Sensor input responds to an Open or Closed switch. Callbox will send either an alarm tone or a recordable voice message when optional switch/sensor detects a change.
  • Can also be programmed to automatically turn callbox ON and transmits recordable voice message or alarm tone to radios monitoring callbox activity.
• Adjustable Speaker Volume: Adjustable 20% to 100%
• Automatic Turn-Off Feature: Conserves batteries. Selectable turn-off times will automatically turn callbox off after a set period of inactivity on the radio channel. Auto Turn-OFF feature must be enabled when using battery only power.
• Listen-In Feature: Callbox can be selectively paged to allow remote monitoring of audio in the vicinity of the callbox.
• Busy Channel TX Inhibit: Prevents Callbox from transmitting if someone else is using the radio channel.
• Recordable Voice Messages: Greeting Message/Send Call Alert Message/Sensor ON/Sensor OFF/ Low Battery Message/Send Power Fail Message/Auto “Re-Send” – Selectable 0-5 times.
• Battery Life: 3 D-Cell Alkaline Batteries: Number of Transmissions: Approximately 6,000 based on a duty cycle of: 3 Seconds Receive, 3 Seconds Transmit, 10 Seconds Standby